Search
傳感器1.jpg)
傳感器2.jpg)
Aluminum economical and practical flange tension sensor
Compatible with standard series PD 21/22
Due to various installation options such as flanges, seated bearings, internal or external fixation, there is no problem installing in any position
Due to overload protection up to 10 times the rated measuring force, high operational safety is ensured
When measuring the direction horizontally, the weight of the mixer has no effect on the measurement results
Due to the application of strain gauges on the plane, the measuring element has good temperature characteristics and high linearity
Due to the large spring constant of the material tension sensor, it is allowed to measure the high-speed operation of Kun
| Single side perforated type | D3 (mm) | Rated measuring force (kN) | ||
| PD 2517 | 17 | 0.1 | 0.2 | 0.5 |
| PD 2525 | 25 | 0.15 | 0.3 | 0.75 |
| PD 2535 | 35 | 0.3 | 0.6 | 1.5 |
| Flanged aluminum sensor PD25 | |
|---|---|
| Accuracy level | 1 |
| Rated characteristic value (sensitivity) | 2mV/V |
| Combining errors | <1% |
| Characteristic value tolerance | 0.2% |
| measuring principle | Strain gauge full bridge |
| Nominal resistance of strain gauge bridge | 350 Ohm |
| Rated voltage of bridge power supply | 10V |
| Maximum allowable value | 14V |
| Mechanical stop | 1.8 to 2.4 × FN depends on type |
| Workload | 1.8 to 2.4 × FN |
| Extreme load | 10 x FN |
| Target measurement stroke | 0.1 to 0.25 mm depending on type |
| Rated temperature range | -10 to 60 ℃ |
| Working temperature range | -10 to 90 ℃ |
| temperature coefficient | ± 0.5%/10 K (characteristic value) ± 0.5%/10 K (zero signal) |
| Protection level | IP54 |
| Maximum allowable axial shear force | one × FN |
| weight | 0.8kg (D3=17mm), 1.25kg (D3=25mm), 2.94kg (D3=35mm) |
Copyright ? Shenzhen DOT LINK Sensing Technology Co., Ltd 粵ICP備2023125867號